Icmp Messages - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

icmp messages

Enables or disables all Internet Control Message Protocol (ICMP) messages.
icmp messages {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> icmp messages enable
-> icmp messages disable
Release History
Release 6.6.1; command was introduced.
Related Commands
icmp type
show icmp control
MIB Objects
alaIcmpCtrl
alaIcmpAllMsgStatus
page 29-70
Enables ICMP messages.
Disables ICMP messages.
default
enable
Enables or disables a specific type of ICMP message, and sets the
minimum packet gap.
Allows the viewing of the ICMP control settings.
OmniSwitch 6250 CLI Reference Guide
IP Commands
November 2009