Show Ipv6 Dhcp Pool; Show Ipv6 Dhcp Binding - Enterasys SECURESTACK C3 Configuration Manual

show ipv6 dhcp pool

show ipv6 dhcp pool
This command displays information about a specific configured pool.
Syntax
show ipv6 dhcp pool pool-name
Parameters
pool‐name
Defaults
None.
Mode
Router privileged execution: C3(su)‐>router#
Usage
The information displayed by this command differs, depending on the configuration parameters
of the pool.
Examples
This example displays the output for PoolA that was not configured for prefix delegation.
C3(su)->router# show ipv6 dhcp pool PoolA
DHCPv6 Pool: PoolA
DNS Server: 2001:db8:1234:5678::A
Domain Name: enterasys.com
This example displays the output for PoolB that was configured for prefix delegation.
C3(su)->router# show ipv6 dhcp pool PoolB
DHCPv6 Pool: PoolB
Client DUID: 00:02:00:00:00:11:0A:C0:89:D3:03:00:09:AA
Host:
Prefix/Prefix Length: 2001:db8:10::/48
Preferred Lifetime: 2592000
Valid Lifetime: 604800
DNS Server:
Domain Name:

show ipv6 dhcp binding

This command displays information about DHCPv6 bindings.
Syntax
show ipv6 dhcp binding [ipv6-addr]
24-18 DHCPv6 Configuration
The name of the configured address pool for which to display
information.