Clear Summertime; Set Prompt - Enterasys SECURESTACK C3 Configuration Manual

clear summertime

clear summertime
Use this command to clear the daylight savings time configuration.
Syntax
clear summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the daylight savings time configuration:
C3(su)->clear summertime

set prompt

Use this command to modify the command prompt.
Syntax
set prompt prompt_string
Parameters
prompt_string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the command prompt to Switch 1:
C3(su)->set prompt "Switch 1"
Switch 1(su)->
3-24 Basic Configuration
Specifies a text string for the command prompt.
Note: A prompt string containing a space in the text must be enclosed
in quotes as shown in the example below.