Area Nssa Default-Info-Originate; Area Nssa No-Redistribute - Enterasys SECURESTACK C3 Configuration Manual

area nssa default-info-originate

area nssa default-info-originate
This command configures the metric value and type for the default route advertised into the
NSSA.
Syntax
area areaid nssa default-info-originate [metric] [comparable | non-comparable]
no area areaid nssa default-info-originate
Parameters
areaid
metric
comparable |
non‐comparable
Defaults
Default metric value is 10.
Mode
Router OSPFv3 configuration: C3
Usage
Use this command to allow a default route to be advertised within the area. This option should be
configured only on area border routers (ABRs).
Use the no form of this command to prevent a default route to be advertised within the area.
Example
This example configures NSSA area 20 to advertise a default route.
C3(su)->router(Config-router)# area 20 nssa default-info-originate

area nssa no-redistribute

This command configures the NSSA area border router to not redistribute learned external routes
to the NSSA.
Syntax
area areaid no-redistribute
no area areaid no-redistribute
Parameters
areaid
25-12 OSPFv3 Configuration
Specifies the area ID in IP address format (dotted‐quad) or as a decimal
value.
(Optional) Specifies the metric of the default route, in the range of 1 to
16777214.
(Optional) Specifies the metric type:
• comparable — nssa‐external 1
• non‐comparable — nssa‐external 2
(su)->router(Config-router)#
Specifies the area ID in IP address format (dotted‐quad) or as a decimal
value.