Clear Lacp; Set Lacp Static - Enterasys SECURESTACK C3 Configuration Manual

clear lacp

Usage
LACP will use this value to form an oper key. Only underlying physical ports with oper keys
matching those of their aggregators will be allowed to aggregate. The default admin key value for
all LAG ports is 32768.
Example
This example shows how to set the LACP admin key to 2000 for LAG port 6:
C3(su)->set lacp aadminkey lag.0.6 2000
clear lacp
Use this command to clear LACP system priority or admin key settings.
Syntax
clear lacp {[asyspri] [aadminkey port-string]}
Parameters
asyspri
aadminkey port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the actor admin key for LAG port 6:
C3(su)->clear lacp aadminkey lag.0.6

set lacp static

Use this command to disable or enable static link aggregation, or to assign one or more underlying
physical ports to a Link Aggregation Group (LAG).
Syntax
set lacp static {disable | enable} | lagportstring [key] port-string
Parameters
disable | enable
lagportstring
7-48 Port Configuration
Clears system priority.
Resets admin keys for one or more ports to the default value of 32768.
Disables or enables static link aggregation.
Specifies the LAG aggregator port to which new ports will be assigned.