Defaults
None.
Mode
Router OSPFv3 configuration: C3
Usage
Use this command to prevent redistribution of learned external routes to the NSSA by this area
border router (ABR). Use the no form of this command to enable redistribution of learned external
routes to the NSSA.
Example
This example configures the router to not redistribute learned external routes into NSSA 20.
C3(su)->router(Config-router)# area 20 no-redistribute
area nssa no-summary
This command configures the NSSA area border router to not advertise summary routes into the
NSSA.
Syntax
area areaid nssa no-summary
no area areaid nssa no-summary
Parameters
areaid
Defaults
None.
Mode
Router OSPFv3 configuration: C3(su)‐>router(Config‐router)#
Usage
Use this command to prevent the advertising of summary routes into the specified NSSA by this
router. Use the no form of this command to enable advertising of summary routes into the NSSA.
Example
This example the router to not advertise summary routes into NSSA 20.
C3(su)->router(Config-router)# area 20 nssa no-summary
(su)->router(Config-router)#
Specifies the area ID in IP address format (dotted‐quad) or as a decimal
value.
area nssa no-summary
SecureStack C3 Configuration Guide 25-13