Show Policy Capability; Show Policy Rule Output Details - Enterasys SECURESTACK C3 Configuration Manual

show policy capability

|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
Table 11‐2 provides an explanation of the command output.
Table 11-2 show policy rule Output Details
Output Field
PID
Rule Type
Rule Data
Mk
PortStr
RS
ST
VLAN
CoS
U
dPID
aPID
show policy capability
Use this command to display detailed policy classification capabilities supported by your
SecureStack C3 device.
Syntax
show policy capability
Parameters
None.
Defaults
None.
11-8 Policy Classification Configuration
|ge.1.1
|ge.1.2
|ge.1.3
|ge.1.4
|ge.1.5
|ge.1.6
|ge.1.7
|ge.1.8
|ge.1.9
|ge.1.10
|ge.1.11
|ge.1.12
What It Displays...
Profile index number. Assigned to this classification rule with the set policy profile
command ("set policy profile" on page 11-4).
Type of classification rule. Refer to
Rule data value. Refer to Table 11-3
Rule data mask. Refer to Table 11-3
value.
Ingress port(s) to which this rule applies.
Whether or not the status of this rule is active (A), not in service or not ready.
Whether or not this rule's storage type is non-volatile (NV) or volatile (V).
VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
If applicable, Class of Service value to which this rule applies.
Whether or not this rule has been used.
Whether or not this is a dynamic profile ID.
Whether or not this is an administrative profile ID.
|16|ge.1.1 | A|NV|
|16|ge.1.2 | A|NV|
|16|ge.1.3 | A|NV|
|16|ge.1.4 | A|NV|
|16|ge.1.5 | A|NV|
|16|ge.1.6 | A|NV|
|16|ge.1.7 | A|NV|
|16|ge.1.8 | A|NV|
|16|ge.1.9 | A|NV|
|16|ge.1.10 | A|NV|
|16|ge.1.11 | A|NV|
|16|ge.1.12 | A|NV|
Table 11-3 for valid types.
for valid values for each classification type.
for valid values for each classification data
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|