Show Macauthentication Output Details - Enterasys SECURESTACK C3 Configuration Manual

show macauthentication
Parameters
port‐string
Defaults
If port‐string is not specified, MAC authentication information will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC authentication information for
C3(su)->show macauthentication ge.2.1-8
MAC authentication:
MAC user password:
Port username significant bits
Port
-------
ge.2.1
ge.2.2
ge.2.3
ge.2.4
ge.2.5
ge.2.6
ge.2.7
ge.2.8
Table 26‐3 provides an explanation of the command output.
Table 26-3 show macauthentication Output Details
Output Field
MAC authentication
MAC user password
Port username
significant bits
Port
Port State
26-26 Authentication and Authorization Configuration
(Optional) Displays MAC authentication information for specific port(s).
For a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 7‐1.
Port Reauth
State Period
-------- ---------- -------- --------- -----------------
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
What It Displays...
Whether MAC authentication is globally enabled or disabled. Set using the set
macauthentication command as described in
page 26-28.
User password associated with MAC authentication on the device. Set using the set
macauthentication password command as described in
password" on page 26-28.
Number of significant bits in the MAC addresses to be used starting with the left-most
bit of the vendor portion of the MAC address. The significant portion of the MAC
address is sent as a user-name credential when the primary attempt to authenticate
the full MAC address fails. Any other failure to authenticate the full address, (i.e.,
authentication server timeout) causes the next attempt to start once again with a full
MAC authentication. Default value of 48 can be changed with the set
macauthentication significant-bits command.
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
Whether or not MAC authentication is enabled or disabled on this port.
- enabled
- NOPASSWORD
- 48
Auth Auth Reauthentications
Allowed Allocated
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
CLI" on page 7-1.
.2.1 through 8:
ge
"set macauthentication" on
"set macauthentication