Show Summertime - Enterasys SECURESTACK C3 Configuration Manual

Parameters
[mm/dd/yyyy]
[hh:mm:ss]
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the system clock to 7:50 a.m:
C3(su)->set time 7:50:00

show summertime

Use this command to display daylight savings time settings.
Syntax
show summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display daylight savings time settings:
C3(su)->show summertime
Summertime is disabled and set to ''
Start : SUN APR 04 02:00:00 2004
End
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the first Sunday of April and ending at 2:00
of the last Sunday of October
Sets the time in:
month, day, year and/or
24‐hour format
At least one set of time parameters must be entered.
: SUN OCT 31 02:00:00 2004
show summertime
SecureStack C3 Configuration Guide 3-21