Clear Logging Interface - Enterasys SECURESTACK C3 Configuration Manual

C3(rw)->router(Config)#exit
C3(rw)->router#exit
C3(rw)->router>exit
C3(rw)->set logging interface vlan 100
C3(rw)->show logging interface
vlan 100

clear logging interface

Use this command to clear the interface used for the source IP address of the system logging back
to the default of the Host interface.
Syntax
clear logging interface
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This command returns the interface used for the source IP address of the system logging back to
the default of the Host interface.
C3(rw)->show logging interface
vlan 100
C3(rw)->clear logging interface
C3(rw)->
192.168.10.1
192.168.10.1
clear logging interface
SecureStack C3 Configuration Guide 14-13