Show Ipv6 Ospf Asbr; Show Ipv6 Ospf Asbr Output Details - Enterasys SECURESTACK C3 Configuration Manual

Table 25-3 show ipv6 ospf abr Output Details (Continued)
Output Field
Next Hop Intf
Next Hop Intf

show ipv6 ospf asbr

This command displays OSPFv3 routes to reach AS border routers.
Syntax
show ipv6 ospf asbr
Parameters
None.
Defaults
None.
Mode
Router privileged execution: C3(su)‐>router#
Example
This example shows how to display OSPFv3 AS border router routes.
C3(su)->router# show ipv6 ospf asbr
Type
----- -------------- ---- ------------ -------------------------------- --------
INTER 1.11.1.1
Table 25‐4 provides an explanation of the command output.
Table 25-4 show ipv6 ospf asbr Output Details
Output Field
Type
Router ID
Cost
Area ID
Next Hop
Next Hop Intf
Router Id Cost
5 0.0.0.20
What It Displays...
Address of the next hop toward the destination.
The outgoing router interface to use when forwarding traffic to the
next hop.
Area ID
FE80::100:1111:FEE6:FB7A
What It Displays...
The type of the route to the destination, which is one of the
following values:
INTRA — Intra-area route
INTER — Inter-area route
Router ID of the destination.
Cost of using this route.
The area ID of the area from which this route is learned.
Address of the next hop toward the destination.
The outgoing router interface to use when forwarding traffic to the
next hop.
show ipv6 ospf asbr
Next Hop
SecureStack C3 Configuration Guide 25-33
Next Hop
Intf
Vlan 35