Set System Password Length; Set System Password Aging - Enterasys SECURESTACK C3 Configuration Manual

set system password length

Examples
This example shows how a super‐user would change the Read‐Write password from the system
default (blank string):
C3(su)->set password rw
Please enter new password: ********
Please re-enter new password: ********
Password changed.
C3(su)->
This example shows how a user with Read‐Write access would change his password:
C3(su)->set password
Please enter old password: ********
Please enter new password: ********
Please re-enter new password: ********
Password changed.
C3(su)->
set system password length
Use this command to set the minimum user login password length.
Syntax
set system password length characters
Parameters
characters
Defaults
None.
Mode
Switch command, super user.
Example
This example shows how to set the minimum system password length to 8 characters:
C3(su)->set system password length 8

set system password aging

Use this command to set the number of days user passwords will remain valid before aging out, or
to disable user account password aging.
Syntax
set system password aging {days | disable}
3-6 Basic Configuration
Specifies the minimum number of characters for a user account password.
Valid values are 0 to 40.