Table of Contents
Advertisement
show dhcp pool configuration
Parameters
poolname
code
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes option 19 from address pool "auto1."
B3(rw)->clear dhcp pool auto1 option 19
show dhcp pool configuration
Use this command to display configuration information for one or all address pools.
Syntax
show dhcp pool configuration {poolname | all}
Parameters
poolname
Defaults
None.
Mode
Read‐only.
Example
This example displays configuration information for all address pools.
B3(rw)->show dhcp pool configuration all
Pool: Atg_Pool
Pool Type
Network
Lease Time
Default Routers
Pool: static1
Pool Type
Client Name
Client Identifier
Host
15-28 DHCP Server Configuration
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the DHCP option code, as defined in RFC 2132. Value can range
from 1 to 254.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Dynamic
192.0.0.0 255.255.255.0
1 days 0 hrs 0 mins
192.0.0.1
Manual
appsvr1
01:00:01:f4:01:27:10
10.1.1.1 255.0.0.0
Advertisement
Table of Contents
