ipv6 router ospf
ipv6 router ospf
This command enters Router OSPFv3 configuration mode.
Syntax
ipv6 router ospf
Parameters
None.
Defaults
None.
Mode
Router global configuration: C3(su)‐>router(Config)#
Usage
Use this command to enter OSPFv3 configuration mode so you can configure global OSPFv3
parameters.
Example
This example illustrates entering router OSPFv3 configuration mode.
C3(su)->router(Config)# ipv6 router ospf
C3(su)->router(Config-router)#
default-information originate
This command is used to control the advertisement of default routes.
Syntax
default-information originate [always] [metric value] [metric-type type]
no default-information originate [metric] [metric-type]
Parameters
always
metric value
metric‐type type
Defaults
A default external route is not generated.
The default metric is unspecified.
The default type is type 2.
25-4 OSPFv3 Configuration
(Optional) Always advertises the default route information.
(Optional) Specifies the metric of the default route. The metric value can
range from 0 to 16777214.
(Optional) Specifies the metric type of the default route. The metric type
can be 1, which specifies type 1 external route, or 2, which specifies type
2 external route.