Chapter 27: Tacacs+ Configuration; Show Tacacs; Show Tacacs Output Details - Enterasys SECURESTACK C3 Configuration Manual

TACACS+ Configuration

show tacacs

Use this command to display the current TACACS+ configuration information and status.
Syntax
show tacacs [state]
Parameters
state
Defaults
If state is not specified, all TACACS+ configuration information will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display all TACACS configuration information.
C3(ro)->show tacacs
TACACS+ status:Disabled
TACACS+ session accounting state:disable
TACACS+ command authorization state:disable
TACACS+ command auccounting state:disable
TACACS+ single connect state:Disabled
TACACS+ service: exec
TACACS+ session authorization A-V pairs:
TACACS+ Server
--------------
1
Table 27‐1 provides an explanation of the command output.
Table 27-1 show tacacs Output Details
Output...
TACACS+ status
TACACS+ session accounting
state
TACACS+ command
authorization state
TACACS+ command accounting
state
27-2
(Optional) Displays only the TACACS+ client status.
access-level attribute
read-only priv-lvl
read-write priv-lvl
super-user priv-lvl
IP address
----------
192.168.10.1
value
0
1
15
Port Timeout
------ -------
49 10
What it displays...
Whether the TACACS+ client is enabled or disabled.
Whether TACACS+ session accounting is enabled or disabled.
Whether TACACS+ command authorization is enabled or disabled.
Whether TACACS+ command accounting is enabled or disabled.
show tacacs