Set Logging Local; Clear Logging Local - Enterasys SECURESTACK C3 Configuration Manual

set logging local

Example
This example shows how to display the state of message logging. In this case, logging to the
console is enabled and logging to a persistent file is disabled.
C3(su)->show logging local
Syslog Console Logging enabled
Syslog File Logging disabled
set logging local
Use this command to configure log messages to the console and a persistent file.
Syntax
set logging local console {enable | disable} file {enable | disable}
Parameters
console enable | disable
file enable | disable
Defaults
None.
Mode
Switch command, read‐write.
Example
This command shows how to enable logging to the console and disable logging to a persistent file:
C3(su)->set logging local console enable file disable

clear logging local

Use this command to clear the console and persistent store logging for the local session.
Syntax
clear logging local
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
14-10 Logging and Network Management
Enables or disables logging to the console.
Enables or disables logging to a persistent file.