Set Macauthentication Macreauthenticate; Set Macauthentication Reauthperiod - Enterasys SECURESTACK C3 Configuration Manual

Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force
C3(su)->set macauthentication portreauthentication ge.2.1-5

set macauthentication macreauthenticate

Use this command to force an immediate reauthentication of a MAC address.
Syntax
set macauthentication macreauthenticate mac-addr
Parameters
mac‐addr
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07
to reauthenticate:
C3(su)->set macauthentication macreauthenticate 00-60-97-b5-4c-07

set macauthentication reauthperiod

Use this command to set the MAC reauthentication period (in seconds). This is the time lapse
between attempts to reauthenticate any current MAC address authenticated to a port.
Syntax
set macauthentication reauthperiod time port-string
Specifies MAC authentication port(s) to be reauthenticated. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐1.
.2.1 though 5 to reauthenticate:
ge
Specifies the MAC address of the session to reauthenticate.
set macauthentication macreauthenticate
SecureStack C3 Configuration Guide 26-33