Clear Logging Default; Show Logging Application - Enterasys SECURESTACK C3 Configuration Manual

clear logging default

Example
This example shows how to set the Syslog default facility name to local2 and the severity level to 4
(error logging):
C3(su)->set logging default facility local2 severity 4
clear logging default
Use this command to reset logging default values.
Syntax
clear logging default {[facility] [severity] [port]}
Parameters
facility
severity
port
Defaults
At least one optional parameter must be entered.
All three optional keywords must be entered to reset all logging values to defaults.
Mode
Switch command, read‐write.
Example
This example shows how to reset the Syslog default severity level to 6:
C3(su)->clear logging default severity

show logging application

Use this command to display the severity level of Syslog messages for one or all applications
configured for logging on your system.
Syntax
show logging application [mnemonic | all]
14-6 Logging and Network Management
(Optional) Resets the default facility name to local4.
(Optional) Resets the default logging severity level to 6 (notifications of
significant conditions).
(Optional) Resets the default UDP port the client uses to send to the server
to 514.