Show Multiauth Port; Set Multiauth Port - Enterasys SECURESTACK C3 Configuration Manual

Mode
Switch command, read‐write.
Example
This example shows how to clear the multiple authentication precedence:
C3(rw)->clear multiauth precedence

show multiauth port

Use this command to display multiple authentication properties for one or more ports.
Syntax
show multiauth port [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, multiple authentication information will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display multiple authentication information for ports
number of "Max users" shown by this command varies depending on the platform.
C3(rw)->show multiauth port ge.3.1-4
Port
------------ ------------ ---------- ---------- ----------
ge.3.1
ge.3.2
ge.3.3
ge.3.4

set multiauth port

Use this command to set multiple authentication properties for one or more ports.
Syntax
set multiauth port mode {auth-opt | auth-reqd | force-auth | force-unauth} |
numusers numusers port-string
(Optional) Displays multiple authentication information for specific port(s).
Mode Max
users
auth-opt n
auth-opt n
auth-opt n
auth-opt n
Allowed Current
users users
1 0
1 0
1 0
1 0
SecureStack C3 Configuration Guide 26-41
show multiauth port
.3.1‐4. The
ge