Query Commands; Show Ipv6; Show Ipv6 Interface - Enterasys SECURESTACK C3 Configuration Manual

Query Commands

Query Commands
For information about...

show ipv6

show ipv6 interface

show ipv6 neighbors
show ipv6 route
show ipv6 route preferences
show ipv6 route summary
show ipv6 traffic
clear ipv6 statistics
show ipv6
This command displays the status of IPv6 forwarding mode and unicast routing mode.
Syntax
show ipv6
Parameters
None.
Defaults
None.
Mode
Router privileged execution: C3(su)‐>router#
Usage
The output of this command displays whether IPv6 forwarding mode and unicast routing mode
are enabled or disabled.
Example
This example displays information about IPv6 modes.
(su)‐>router#
C3
IPv6 Forwarding Mode
IPv6 Unicast Routing Mode
show ipv6 interface
This command displays information about one or all configured IPv6 interfaces.
Syntax
show ipv6 interface [vlan vlan-id | tunnel tunnel-id | loopback loop-id]
22-22 IPv6 Configuration
show ipv6
Enabled
Enabled
Refer to page...
22-22
22-22
22-24
22-25
22-27
22-28
22-29
22-34