Enterasys SECURESTACK C3 Configuration Manual page 835

This chapter provides information about the commands used to configure and monitor TACACS+
(Terminal Access Controller Access‐Control System Plus).
TACACS+ is a security protcol that provides services for secure authentication, CLI command
authorization, and CLI auditing for administrative access. It can be used as an alternative to the
standard RADIUS security protocol (RFC 2865). TACACS+ runs over TCP and encrypts the body
of each management packet.
Based on the now obsolete TACACS protocol (defined in RFC 1492), TACACS+ is defined in an
un‐published and expired Internet Draft draft‐grant‐tacacs‐02.txt, "The TACACS+ Protocol
Version 1.78," January, 1997.
For detailed information about using TACACS+ in your network, refer to the Enterasys Feature
Guide "TACACS+ Configuration" located on the Enterasys web site:
http://www.enterasys.com/support/manuals/f.html#M
For information about...
show tacacs
set tacacs
show tacacs server
set tacacs server
clear tacacs server
show tacacs session
set tacacs session
clear tacacs session
show tacacs command
set tacacs command
show tacacs singleconnect
set tacacs singleconnect
show tacacs interface
set tacacs interface
clear tacacs interface
TACACS+ Configuration
SecureStack C3 Configuration Guide 27-1
27
Refer to page...
27-2
27-3
27-3
27-4
27-5
27-6
27-7
27-8
27-9
27-9
27-10
27-10
27-11
27-11
27-12