Chapter 11: Policy Classification Configuration; Policy Classification Configuration Summary - Enterasys SECURESTACK C3 Configuration Manual

Stackable switches

Hide thumbs Also See for SECURESTACK C3:

Table of Contents

This chapter describes the Policy Classification set of commands and how to use them.

For information about...

Configuring Policy Profiles

Configuring Classification Rules

Assigning Ports to Policy Profiles

Configuring Policy Class of Service (CoS)

Policy Classification Configuration Summary

SecureStack C3 devices support policy profile‐based provisioning of network resources by

allowing IT administrators to:

Create, change or remove policy profiles based on business‐specific use of network services.

Permit or deny access to specific services by creating and assigning classification rules which

map user profiles to protocol‐based frame filtering policies configured for a particular VLAN

or Class of Service (CoS).

Assign or unassign ports to policy profiles so that only ports activated for a profile will be

allowed to transmit frames accordingly.

Policy Classification Configuration

Note: An Enterasys Networks Feature Guide document containing an in-depth discussion of Policy

configuration is located on the Enterasys Networks web site:

http://www.enterasys.com/support/manuals/

Note: It is recommended that you use Enterasys Networks NMS Policy Manager as an alternative

to CLI for configuring policy classification on the SecureStack C3 devices.

Refer to page...

SecureStack C3 Configuration Guide 11-1

Show Quick Links

Table of Contents