Clear Maclock Firstarrival; Set Maclock Agefirstarrival - Enterasys SECURESTACK C3 Configuration Manual

Example
This example shows how to restrict MAC locking to 6 MAC addresses on
C3(su)->set maclock firstarrival ge.2.3 6

clear maclock firstarrival

Use this command to reset the number of first arrival MAC addresses allowed per port to the
default value of 600.
Syntax
clear maclock firstarrival port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset MAC first arrivals on
C3(su)->clear maclock firstarrival ge.2.3

set maclock agefirstarrival

Use this command to enable or disable the aging of first arrival MAC addresses. When enabled,
first arrival MAC addresses that are aged out of the forwarding database will be removed from the
associated port MAC lock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
port‐string
enable | disable
Defaults
None.
Specifies the port on which to reset the first arrival value. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐1.
Specifies the port(s) on which to enable or disable first arrival aging. For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 7‐1.
Enable or disable first arrival aging. By default, first arrival aging is
disabled.
clear maclock firstarrival
.2.3:
ge
.2.3:
ge
SecureStack C3 Configuration Guide 26-65