Show Multiauth Idle-Timeout - Enterasys SECURESTACK C3 Configuration Manual

show multiauth idle-timeout

Parameters
all
agent dot1x | mac |
pwa
mac address
port port‐string
Defaults
If no options are specified, multiple authentication session entries will be displayed for all
sessions, authentication types, MAC addresses, and ports.
Mode
Switch command, read‐only.
Example
This example shows how to display multiple authentication session information for port
C3(su)->show multiauth session port ge.1.1
__________________________________________
Port
Auth status
Agent type
Server type
Policy index
Session timeout
Idle timeout
Termination time | Not Terminated
show multiauth idle-timeout
Use this command to display the timeout value, in seconds, for an idle session for all
authentication methods.
Syntax
show multiauth idle-timeout
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
26-44 Authentication and Authorization Configuration
(Optional) Displays information about all sessions, including those with
terminated status.
(Optional) Displays 802.1X, or MAC, or port web authentication session
information.
(Optional) Displays multiple authentication session entries for specific
MAC address(es).
(Optional) Displays multiple authentication session entries for the
specified port or ports.
| ge.1.1
| success
| dot1x
| radius
| 0
| 0
| 5
Station address | 00-01-03-86-0A-87
Last attempt | FRI MAY 18 11:16:36 2007
Session applied | true
VLAN-Tunnel-Attr | none
Policy name | Administrator
Session duration | 0,00:00:25
Idle time | 0,00:00:00
.1.1.
ge