Show Netstat Output Details - Enterasys SECURESTACK C3 Configuration Manual

show netstat
Example
The following example shows the output of this command.
C3(su)->show netstat
Prot Local Address
---- -----------------------------
TCP 127.0.0.1.2222
TCP 0.0.0.0.80
TCP 0.0.0.0.23
TCP 10.1.56.17.23
UDP 0.0.0.0.17185
UDP 127.0.0.1.49152
UDP 0.0.0.0.161
UDP 0.0.0.0.*
UDP 0.0.0.0.514
The following table describes the output of this command.
Table 14-4 show netstat Output Details
Output Field
Prot
Local Address
Foreign Address
State
14-18 Logging and Network Management
Foreign Address
-----------------------------
0.0.0.0.*
0.0.0.0.*
0.0.0.0.*
134.141.99.104.47718
0.0.0.0.*
127.0.0.1.17185
0.0.0.0.*
0.0.0.0.*
0.0.0.0.*
What it displays...
Type of protocol running on the connection.
IP address of the connection's local host.
IP address of the connection's foreign host.
Communications mode of the connection.
State
-----------
LISTEN
LISTEN
LISTEN
ESTABLISHED