Setting The Authentication Login Method; Purpose; Commands; Show Authentication Login - Enterasys SECURESTACK C3 Configuration Manual

Setting the Authentication Login Method

The undecorated format is simply a string that specifies a policy profile name. The undecorated
format cannot be used for management access authentication.
Decorated Filter‐IDs are processed first by the switch. If no decorated Filter‐IDs are found, then
undecorated Filter‐IDs are processed. If multiple Filter‐IDs are found that contain conflicting
values, a Syslog message is generated.
Setting the Authentication Login Method

Purpose

To configure the authentication login method to be used for management.

Commands

The commands used to configure the authentication login method are listed below.
For information about...

show authentication login

set authentication login

clear authentication login
show authentication login
Use this command to display the current authentication login method for management.
Syntax
show authentication login
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the current authentication login method.
C3(rw)->show authentication login
Current authentication login is any
set authentication login
Use this command to set the authentication login method.
26-4 Authentication and Authorization Configuration
Refer to page...
26-4
26-4
26-5