Clear Dhcp Pool Option; Show Dhcp Pool Configuration - Enterasys SecureStack C2 C2G170-24 Configuration Manual

clear dhcp pool option

Use this command to remove a DHCP option from the address pool being configured.
Syntax
clear dhcp pool poolname option code
Parameters
poolname
code
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes option 19 from address pool "auto1."
C2(rw)->clear dhcp pool auto1 option 19

show dhcp pool configuration

Use this command to display configuration information for one or all address pools.
Syntax
show dhcp pool configuration {poolname | all}
Parameters
poolname
Defaults
None.
Mode
Read‐only.
Example
This example displays configuration information for all address pools.
C2(rw)->show dhcp pool configuration all
Pool: Atg_Pool
Pool Type
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the DHCP option code, as defined in RFC 2132. Value can range
from 1 to 254.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
clear dhcp pool option
Dynamic
SecureStack C2 Configuration Guide 16-29