Clear Ipv6 Dhcp Statistics - Enterasys SECURESTACK C3 Configuration Manual

Table 24-2 Output of show ipv6 dhcp statistics Command (Continued)
Output...
DHCPv6 Decline Packets Received
DHCPv6 Inform Packets Received
DHCPv6 Relay-forward Packets
Received
DHCPv6 Relay-reply Packets
Received
DHCPv6 Malformed Packets Received
Received DHCPv6 Packets Discarded
Total DHCPv6 Packets Received
DHCPv6 Advertisement Packets
Transmitted
DHCPv6 Reply Packets Transmitted
DHCPv6 Reconfig Packets
Transmitted
DHCPv6 Relay-reply Packets
Transmitted
DHCPv6 Relay-forward Packets
Transmitted
Total DHCPv6 Packets Transmitted

clear ipv6 dhcp statistics

This command clears IPv6 DHCP statistics, either all statistics or only for a specific interface.
Syntax
clear ipv6 dhcp statistics [vlan vlan-id]
Parameters
vlan vlan‐id
Defaults
If no interface is specified, IPv6 DHCP statistics for all interfaces are cleared.
Mode
Router privileged execution: C3(su)‐>router#
Example
This example clears DHCPv6 statistics for VLAN 80.
C3(su)->router# clear ipv6 dhcp statistics vlan 80
What it displays...
Number of decline received statistics.
Number of inform received statistics.
Number of relay forward received statistics.
Number of relay-reply received statistics.
Number of malformed packets statistics.
Number of DHCP discarded statistics.
Total number of DHCPv6 received statistics.
Number of advertise sent statistics.
Number of reply sent statistics.
Number of reconfigure sent statistics.
Number of relay-reply sent statistics.
Number of relay-forward sent statistics.
Total number of DHCPv6 sent statistics.
(Optional) Specifies the interface for which to clear DHCPv6 statistics.
clear ipv6 dhcp statistics
SecureStack C3 Configuration Guide 24-17