Show Dhcp Pool Configuration - Enterasys SecureStack C2 Configuration Manual

Mode
Switch command, read‐write.
Example
This example removes option 19 from address pool "auto1."
C2(rw)->clear dhcp pool auto1 option 19

show dhcp pool configuration

Use this command to display configuration information for one or all address pools.
Syntax
show dhcp pool configuration {poolname | all}
Parameters
poolname
Defaults
None.
Mode
Read‐only.
Example
This example displays configuration information for all address pools.
C2(rw)->show dhcp pool configuration all
Pool: Atg_Pool
Pool Type
Network
Lease Time
Default Routers
Pool: static1
Pool Type
Client Name
Client Identifier
Host
Lease Time
Option
Pool: static2
Pool Type
Hardware Address
Hardware Address Type
Host
Lease Time
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
show dhcp pool configuration
Dynamic
192.0.0.0 255.255.255.0
1 days 0 hrs 0 mins
192.0.0.1
Manual
appsvr1
01:00:01:f4:01:27:10
10.1.1.1 255.0.0.0
infinite
19 hex 01
Manual
00:01:f4:01:27:10
ieee802
192.168.10.1 255.255.255.0
infinite
SecureStack C2 Configuration Guide 14-29