Show Spantree Disputedbpduthreshold; Clear Spantree Disputedbpduthreshold - Enterasys SECURESTACK C3 Configuration Manual

Example
This example shows how to set the disputed BPDU threshold value to 5:
C3(rw)->set spantree disputedbpduthreshold 5

show spantree disputedbpduthreshold

Use this command to display the current value of the disputed BPDU threshold.
Syntax
show spantree disputedbpduthreshold
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the current disputed BPDU threshold:
C3(rw)->show spantree disputedbpduthreshold
The disputed BPDU threshold value is 0

clear spantree disputedbpduthreshold

Use this command to return the disputed BPDU threshold to its default value of 0, meaning that
disputed BPDU traps should not be sent.
Syntax
clear spantree disputedbpduthreshold
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the disputed BPDU threshold to the default of 0:
C3(rw)->clear spantree disputedbpduthreshold
show spantree disputedbpduthreshold
SecureStack C3 Configuration Guide 9-53