Show Lldp Port Network-Policy; Show Lldp Port Remote-Info Output Display - Enterasys SECURESTACK C3 Configuration Manual

show lldp port network-policy

Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer
Model Number
Note that the information fields displayed by the show lldp port remote‐info command will vary,
depending on the type of remote device that is connected to the port.
Table 6‐5 describes the output fields that are unique to the remote system information database.
Refer to Table 6‐4 on page 19 for descriptions of the information fields that are common to both the
local and the remote system information databases.
Table 6-5 show lldp port remote-info Output Display
Output Field
Remote Port Id
Device Type
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer
Model Number
Asset ID
show lldp port network-policy
Use this command to display LLDP port network policy configuration information. Network
policy information is configured using the set lldp port network‐policy command.
Syntax
show lldp port network-policy {all | voice | voice-signaling | guest-voice | guest-
voice-signaling | softphone-voice | video-conferencing | streaming-video | video-
signaling} [port-string]
Parameters
all
voice
voice‐signaling
guest‐voice
guest‐voice‐signaling
6-22 Discovery Protocol Configuration
: 4610D01A
: b10d01b2_7.bin
: a10d01b2_7.bin
: 05GM42004348
: Avaya
: 4610
What it Displays...
Displays whatever port Id information received in the LLDPDU from the remote
device. In this case, the port Id is MAC address of remote device.
Mandatory LLDP-MED Capabilities TLV. Displayed only when the port is
connected to an LLDP-MED-capable endpoint device.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component. In the above
example, no asset ID was received from the remote device so the field is not
displayed.
Displays information about all network policy applications.
Displays information about only the voice application type.
Displays information about only the voice signaling application
type.
Displays information about only the guest voice application type.
Displays information about only the guest voice signaling
application type.