Enterasys SECURESTACK C3 Configuration Manual page 770

clear eapol
Parameters
auth‐mode
port‐string
Defaults
If auth‐mode is not specified, all EAPOL settings will be cleared.
If port‐string is not specified, settings will be cleared for all ports.
Mode
Switch command, read‐write.
Example
This example shows how to clear the EAPOL authentication mode for port
C3(su)->clear eapol auth-mode ge.1.3
26-24 Authentication and Authorization Configuration
(Optional) Globally clears the EAPOL authentication mode.
Specifies the port(s) on which to clear EAPOL parameters. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐1.
.1.3:
ge