Show Ipv6 Route Summary - Enterasys SECURESTACK C3 Configuration Manual

show ipv6 route summary

Table 22-3 show ipv6 route preferences Output Details
Output Field
OSPF Est T2
OSPF NSSA T1
OSPF NSS! T2
show ipv6 route summary
This command displays the summary of the routing table.
Syntax
show ipv6 route summary [all]
Parameters
all
Defaults
None.
Mode
Router privileged execution: C3(su)‐>router#
Router user execution: C3(su)‐>router>
Usage
Use the command without parameters to display the count summary for only the best routes. Use
all to display the count summary for all routes, including best and non‐best routes.
Example
This example illustrates the summary information displayed by this command.
C3(su)->router>show ipv6 route summary all
IPv6 Routing Table Summary - 6 entries
Connected Routes
Static Routes
OSPF Routes
Intra Area Routes
Inter Area Routes
External Type-1 Routes
External Type-2 Routes
Total routes
Number of Prefixes:
/0: 1,
Table 22‐4 provides an explanation of the command output.
22-28 IPv6 Configuration
What It Displays...
Preference of OSPF Type-2 external routes.
Preference of OSPF NSSA Type 1 routes.
Preference of OSPF NSSA Type 2 routes.
(Optional) Display the count summary for all routes, including best and
non‐best routes.
/64: 5
3
3
0
0
0
0
0
6