Area Nssa Translator Role; Area Nssa Translator-Stab-Intv - Enterasys SECURESTACK C3 Configuration Manual

area nssa translator role

area nssa translator role
This command configures the translator role of the router.
Syntax
area areaid nssa translator-role {always | candidate}
no area areaid nssa translator-role
Parameters
areaid
always
candidate
Defaults
By default, the translator role is disabled.
Mode
Router OSPFv3 configuration: C3(su)‐>router(Config‐router)#
Usage
The NSSA Translator Role specifies whether or not an NSSA router will unconditionally translate
Type‐7 LSAs to Type‐5 LSAs when acting as an NSSA border router.
When the always parameter is specified with this command, the router will always translate Type‐
7 LSAs, regardless of the translator state of other NSSA border routers. When the candidate
parameter is specified, the NSSA router will participate in the translator election process
described in RFC 3101, "The OSPF Not‐So‐Stubby Area (NSSA) Option."
Use the no form of this command to return the configured translator role to the default of
disabled.
Example
This example configures the router to always assume the translator role when it becomes an area
border router for NSSA 20.
C3(su)->router(Config-router)# area 20 nssa translator-role always

area nssa translator-stab-intv

This command configures the translator stability interval of the NSSA.
Syntax
area areaid translator-stab-intv interval
no area areaid translator-stab-intv
25-14 OSPFv3 Configuration
Specifies the area ID in IP address format (dotted‐quad) or as a decimal
value.
Specifies that the router will always assume the role of the translator the
instant is becomes a border router.
Specifies that the router will participate in the translator election
process when it becomes a border router.