Table of Contents
Advertisement
Usage
ACLs must be applied per routing interface. An access list can be applied to inbound traffic only.
Access lists can now be applied to routed VLANs which incorporate LAGs.
Example
This example shows how to apply access list 1 for all inbound frames on the VLAN 1 interface.
Through the definition of access list 1, only frames with a source address on the 192.5.34.0/24
network will be routed. All the frames with other source addresses received on the VLAN 1
interface are dropped:
C3(su)->router(Config)#access-list 1 permit 192.5.34.0 0.0.0.255
C3(su)->router(Config)#interface vlan 1
C3(su)->router(Config-if(Vlan 1))#ip access-group 1 in
ip access-group
SecureStack C3 Configuration Guide 26-87
- Quick Links:
- Set Ip Address
Hide quick links:
Advertisement
Table of Contents
