Show Snmp Context; Set Snmp View; Show Snmp View Output Details - Enterasys SECURESTACK C3 Configuration Manual

Table 8-7 show snmp view Output Details
Output Field
View Name
Subtree OID
Subtree mask
View Type
Storage type
Row status

show snmp context

Use this command to display the context list configuration for SNMP's view‐based access control.
Syntax
show snmp context
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Usage
An SNMP context is a collection of management information that can be accessed by an SNMP
agent or entity. The default context allows all SNMP agents to access all management information
(MIBs). When created using the set snmp access command ("set snmp access" on page 8‐18), other
contexts can be applied to limit access to a subset of management information.
Example
This example shows how to display a list of all SNMP contexts known to the device:
C3(su)->show snmp context
--- Configured contexts:
default context (all mibs)

set snmp view

Use this command to set a MIB configuration for SNMPv3 view‐based access (VACM).
Syntax
set snmp view viewname viewname subtree subtree [mask mask] [included | excluded]
[volatile | nonvolatile]
What It Displays...
Name assigned to a MIB view.
Name identifying a MIB subtree.
Bitmask applied to a MIB subtree.
Whether or not subtree use must be included or excluded for this view.
Whether storage is in nonVolatile or Volatile memory
Status of this entry: active, notInService, or notReady.
show snmp context
SecureStack C3 Configuration Guide 8-21