Show Ip Icmp Redirect - Enterasys SECURESTACK C3 Configuration Manual

show ip icmp redirect

This example disables sending ICMP redirects globally.
C3(su)->router#configure
C3(su)->router(Config)#no ip icmp redirect enable
show ip icmp redirect
Use this command to display the status of sending ICMP redirects at a global or interface level.
Syntax
show ip icmp redirect {status | interface [vlan vlan-id]}
Parameters
status
interface
vlan vlan‐id
Defaults
If no VLAN is specified with the interface parameter, information for all VLAN interfaces is
displayed.
Mode
Privileged EXEC mode:C3(su)‐>router#
Router global configuration mode: C3(su)‐>router(Config)#
Examples
This example displays the global ICMP redirect status.
C3(su)->router#show ip icmp redirect status
Global ICMP Redirect status - Enabled
This example displays the ICMP redirect status for VLAN 5.
C3(su)->router#show ip icmp redirect interface vlan 5
Vlan Id
-------
5
19-24 IP Configuration
Display the global ICMP redirect status.
Display ICMP redirect status for interfaces.
(Optional) Display ICMP redirect status for the specified VLAN.
Admin Status
------------
Enabled