Clear Port Priority-Queue - Enterasys SECURESTACK C3 Configuration Manual

clear port priority-queue

Example
This example shows how to set priority 5 frames received on
C3(su)->set port priority-queue ge.2.12 5 0
clear port priority-queue
Use this command to reset port priority queue settings back to defaults for one or more ports.
Syntax
clear port priority-queue port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the priority queue settings on ge.2.12:
C3(su)->clear port priority-queue
12-6 Port Priority Configuration
Specifies the port for which to clear priority‐to‐queue mappings. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 7‐1.
ge.
2.12
.2.12 to transmit on queue 0.
ge