Clear Lldp Port Tx-Tlv - Enterasys SECURESTACK C3 Configuration Manual

Example
This example returns all network policy values for all applications on port ge.1.1 to their default
values.
C3(rw)->clear lldp port network-policy all state tag vid cos dscp ge.1.1

clear lldp port tx-tlv

Use this command to clear the optional LLDP and LLDP‐MED TLVs to be transmitted in
LLDPDUs by the specified port or ports to the default value of disabled.
Syntax
clear lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap] [mgmt-
addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr] [max-frame] [med-
cap] [med-pol] [med-loc] [med-poe]} port-string
Parameters
all
port‐desc
sys‐name
sys‐desc
sys‐cap
mgmt‐addr
vlan‐id
stp
lacp
gvrp
mac‐phy
poe
link‐aggr
max‐frame
med‐cap
Disables all optional TLVs from being transmitted in LLDPDUs.
Disables the Port Description optional basic LLDP TLV from being
transmitted in LLDPDUs.
Disables the System Name optional basic LLDP TLV from being
transmitted in LLDPDUs.
Disables the System Description optional basic LLDP TLV from being
transmitted in LLDPDUs.
Disables the System Capabilities optional basic LLDP TLV from
being transmitted in LLDPDUs.
Disables the Management Address optional basic LLDP TLV from
being transmitted in LLDPDUs.
Disables the Port VLAN ID IEEE 802.1 Extensions TLV from being
transmitted in LLDPDUs.
Disables the Spanning Tree information defined by Protocol Identity
IEEE 802.1 Extensions TLV from being transmitted in LLDPDUs.
Disables the LACP information defined by Protocol Identity IEEE
802.1 Extensions TLV from being transmitted in LLDPDUs.
Disables the GVRP information defined by Protocol Identity IEEE
802.1 Extensions TLV from being transmitted in LLDPDUs.
Disables the MAC‐PHY Configuration/Status IEEE 802.3 Extensions
TLV from being transmitted in LLDPDUs.
Disables the Power via MDI IEEE 802.3 Extensions TLV from being
transmitted in LLDPDUs. Only valid for PoE‐enabled ports.
Disables the Link Aggregation IEEE 802.3 Extensions TLV from being
transmitted in LLDPDUs.
Disables the Maximum Frame Size IEEE 802.3 Extensions TLV from
being transmitted in LLDPDUs.
Disables the LLDP‐MED Capabilities TLV from being transmitted in
LLDPDUs.
clear lldp port tx-tlv
SecureStack C3 Configuration Guide 6-35