Enterasys SECURESTACK C3 Configuration Manual page 168

clear lldp port tx-tlv
med‐pol
med‐loc
med‐poe
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example disables the management address, MED capability, MED network policy, and MED
location identification TLVs from being sent in LLDPDUs by port
C3(rw)->clear lldp port tx-tlv mgmt-addr med-cap med-pol med-loc ge.1.1
6-36 Discovery Protocol Configuration
Disables the LLDP‐MED Network Policy TLV from being transmitted
in LLDPDUs.
Disables the LLDP‐MED Location Identification TLV from being
transmitted in LLDPDUs.
Disables the LLDP‐MED Extended Power via MDI TLV from being
transmitted in LLDPDUs. Only valid for PoE‐enabled ports.
Specifies the port or range of ports to be affected.
1.1.
ge.