show arpinspection vlan
show arpinspection vlan
Use this command to display the ARP configuration of one or more VLANs.
Syntax
show arpinspection vlan vlan-range
Parameters
vlan‐range
Defaults
None.
Mode
Switch command, read‐write.
Example
This example displays ARP configuration information for VLAN 5.
C3(su)->show arpinspection vlan 5
Source MAC Validation
Destination MAC Validation
IP Address Validation
Vlan
----
5
show arpinspection statistics
Use this command to display ARP statistics for all DAI‐enabled VLANs or for specific VLANs.
Syntax
show arpinspection statistics [vlan vlan-range]
Parameters
vlan vlan‐range
Defaults
If no VLANs are specified, limited statistics for all DAI‐enabled VLANs is displayed.
Mode
Switch command, read‐write.
Usage
When no specific VLANs are entered, this command displays the number of Forwarded and
Dropped ARP packets per DAI‐enabled VLAN. When one or more VLANs are specified, this
command displays more detailed statistics.
17-26 DHCP Snooping and Dynamic ARP Inspection
Specifies the VLANs for which to display configuration information.
Configuration Log Invalid
------------- ----------- --------------------------------
Disabled
Enabled
(Optional) Specifies the VLANs for which to display statistics.
Disabled
Disabled
Disabled
ACL Name
staticARP
Static flag
-----------
Enabled