Clear Port Txq - Enterasys SECURESTACK C3 Configuration Manual

clear port txq

Use this command to clear port transmit queue values back to their default values.
Syntax
clear port txq port-string
Parameters
port‐string
Defaults
By default, transmit queues are defined as follows:
Queue
0
1
2
3
Mode
Switch command, read‐write.
Example
This example shows how to clear transmit queue values on ge.1.1:
C3(su)->clear port txq
Clears transmit queue values on specific port(s) back to their default
values. For a detailed description of possible port‐string values, refer to
"Port String Syntax Used in the CLI" on page 7‐1.
Only physical ports can be configured with this command. LAG ports
cannot be configured.
Mode Weight
WRR 1
WRR 2
WRR 3
WRR 4
ge.
1.1
Queue Mode
4 WRR
5 WRR
6 WRR
7 WRR
SecureStack C3 Configuration Guide 12-9
clear port txq
Weight
5
6
7
8