Set Width; Set Length - Enterasys SECURESTACK C3 Configuration Manual

Example
This example shows how to set the system contact string:
C3(su)->set system contact "Joe Smith"

set width

Use this command to set the number of columns for the terminal connected to the switch's console
port.
Syntax
set width screenwidth [default]
Parameters
screenwidth
default
Defaults
None.
Mode
Switch command, read‐write.
Usage
The number of rows of CLI output displayed is set using the set length command as described in
"set length" on page 3‐29.
Example
This example shows how to set the terminal columns to 50:
C3(su)->set width 50

set length

Use this command to set the number of lines the CLI will display. This command is persistent
(written to NV‐RAM).
Syntax
set length screenlength
Parameters
screenlength
Sets the number of terminal columns. Valid values are 50 to 150.
(Optional) Makes this setting persistent for all future sessions (written to
NV‐RAM).
Sets the number of lines in the CLI display. Valid values are 0, which
disables the scrolling screen feature described in "Displaying Scrolling
Screens" on page 1‐9, and from 5 to 512.
SecureStack C3 Configuration Guide 3-29
set width