Show Multiauth - Enterasys SECURESTACK C3 Configuration Manual

show multiauth

For information about...
clear multiauth port
show multiauth station
show multiauth session
show multiauth idle-timeout
set multiauth idle-timeout
clear multiauth idle-timeout
show multiauth session-timeout
set multiauth session-timeout
clear multiauth session-timeout
show multiauth
Use this command to display multiple authentication system configuration.
Syntax
show multiauth
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display multiple authentication system configuration:
C3(rw)->show multiauth
Multiple authentication system configuration
-------------------------------------------------
Supported types
Maximum number of users
Current number of users
System mode
Default precedence
Admin precedence
Operational precedence
26-38 Authentication and Authorization Configuration
: dot1x, pwa, mac
: 768
: 2
: multi
: dot1x, pwa, mac
: dot1x, pwa, mac
: dot1x, pwa, mac
Refer to page...
26-42
26-43
26-43
26-44
26-45
26-46
26-46
26-47
26-48