Clear Snmp Notifyprofile; Creating A Basic Snmp Trap Configuration - Enterasys SECURESTACK C3 Configuration Manual

Stackable switches

Hide thumbs Also See for SECURESTACK C3:

Table of Contents

If storage type is not specified, nonvolatile (permanent) will be applied.

Switch command, read‐write.

This example shows how to create an SNMP notify profile named area51

parameters entry.

C3(su)->set snmp notifyprofile area51 targetparam v3ExampleParams

clear snmp notifyprofile

Use this command to delete an SNMP notify profile configuration.

clear snmp notifyprofile profile targetparam targetparam

Switch command, read‐write.

This example shows how to delete SNMP notify profile "area51":

C3(su)->clear snmp notifyprofile area51 targetparam v3ExampleParams

Traps are notification messages sent by an SNMPv1 or v2 agent to a network management station,

a console, or a terminal to indicate the occurrence of a significant event, such as when a port or

device goes up or down, when there are authentication failures, and when power supply errors

Specifies an SNMP filter notify name.

Specifies an associated entry in the SNMP Target Params Table.

(Optional) Specifies a storage type.

Specifies an SNMP filter notify name to delete.

Specifies an associated entry in the snmpTargetParamsTable.

clear snmp notifyprofile

and associate a target

SecureStack C3 Configuration Guide 8-37

Show Quick Links

Table of Contents