Show Ipv6 Dhcp Interface - Enterasys SECURESTACK C3 Configuration Manual

show ipv6 dhcp interface

show ipv6 dhcp interface
This command displays DHCPv6 configuration information or DHCPv6 statistics for the specified
routing interface.
Syntax
show ipv6 dhcp vlan vlan-id [statistics]
Parameters
vlan vlan‐id
statistics
Defaults
If statistics is not specified, configuration information about the interface is displayed.
Mode
Router privileged execution: C3(su)‐>router#
Usage
When you display DHCPv6 configuration information, the information displayed is different
depending on whether the interface has been configured as a DHCPv6 server or relay agent.
Examples
This example displays DHCPv6 configuration information about VLAN 80, which was configured
as a DHCPv6 server.
C3(su)->router# show ipv6 dhcp interface vlan 80
IPv6 Interface
Mode
Pool Name
Server Preference
Option Flags
This example displays DHCPv6 configuration information about VLAN 10, which was configured
as a relay agent. The output fields are described in Table
C3(su)->router# show ipv6 dhcp interface vlan 10
IPv6 Interface
Mode
Relay Address
Relay Interface Number
Relay Remote ID
Option Flags
Table 24‐1 provides an explanation of the command output.
24-14 DHCPv6 Configuration
Specifies the ID of the routing interface for which to display DHCPv6
information.
(Optional) Specifies that DHCPv6 statistics for the specified interface
should be displayed.
Vlan 80
Server
newpool
5
Rapid Commit
24‐1 on page 24‐15.
Vlan 10
Relay
5006:4567::100:1