Clear Arpinspection Limit - Enterasys SECURESTACK C3 Configuration Manual

clear arpinspection limit

Examples
This example removes a permit rule from the ARP ACL named staticARP.
C3(su)->clear arpinspection filter staticARP permit ip host 192.168.1.10 mac host
00:01:22:33:44:55
This example disables static mapping of the ARP ACL named staticARP that is associated with
VLAN 5.
C3(su)->clear arpinspection filter staticARP vlan 5 static
This example removes the ARP ACL named staticARP from VLAN 5.
C3(su)->clear arpinspection filter staticARP vlan 5
This example removes the ARP ACL named staticARP from the switch completely.
C3(su)->clear arpinspection filter staticARP
clear arpinspection limit
Use this command to return the DAI rate limiting values to their default values for a port or range
of ports.
Syntax
clear arpinspection limit port port-string
Parameters
port‐string
Defaults
Rate = 15 packets per second
Burst Interval = 1 second
Mode
Switch mode, read‐write.
Usage
Use the set arpinspection limit command to change the values of the rate limit and burst interval.
Use the show arpinspection ports command to display the currently configured rate limits.
Example
This example returns the DAI rate limiting values to their defaults for port ge.1.1.
C3(su)->clear arpinspection limit port ge.1.1
17-30 DHCP Snooping and Dynamic ARP Inspection
Specifies the ports on which to return the rate limiting values to
defaults.