Table of Contents
Advertisement
show snmp view
show snmp view
Use this command to display the MIB configuration for SNMPv3 view‐based access (VACM).
Syntax
show snmp view [viewname] [subtree oid-or-mibobject] [volatile | nonvolatile |
read-only]
Parameters
viewname
subtree oid‐or‐mibobject
volatile | nonvolatile |
read‐only
Defaults
If no parameters are specified, all SNMP MIB view configuration information will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display SNMP MIB view configuration information:
C3(su)->show snmp view
--- SNMP MIB View information ---
View Name
Subtree OID
Subtree mask
View Type
Storage type
Row status
View Name
Subtree OID
Subtree mask
View Type
Storage type
Row status
View Name
Subtree OID
Subtree mask
View Type
Storage type
Row status
Table
8‐7 provides an explanation of the command output. For details on using the set snmp view
command to assign variables, refer to "set snmp view" on page 8‐21.
8-20 SNMP Configuration
(Optional) Displays information for a specific MIB view.
(Optional) Displays information for a specific MIB subtree when
viewname is specified.
(Optional) Displays entries for a specific storage type.
= All
= 1
=
= included
= nonVolatile
= active
= All
= 0.0
=
= included
= nonVolatile
= active
= Network
= 1.3.6.1.2.1
=
= included
= nonVolatile
= active
- Quick Links:
- Set Ip Address
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SECURESTACK C3 and is the answer not in the manual?
Questions and answers