Appendix A: Policy And Authentication Capacities; Policy Capacities - Enterasys SECURESTACK C3 Configuration Manual

This appendix lists the policy and authentication capacities of the SecureStack C3 as of the date
this document was published. Please refer to the Release Notes for your firmware version for the
latest capacity information.

Policy Capacities

Refer to the "Configuring Policy" Feature Guide for an in‐depth discussion of Policy
configuration. This Feature Guide is located on the Enterasys Networks web site:
http://www.enterasys.com/support/manuals/
Table A-1 Policy Capacities
Feature
Maximum policy roles (profiles) per system
Maximum number of unique rules per system
Maximum number of rules per single role
Maximum number of masks
CoS rate limiting (IRL) support
Priority-based rate limiting
Rule-based rate limiting
Role-based rate limiting
Fixed rule precedence
Supported rule types
Policy and Authentication Capacities
Maximum number of ether type rules
Maximum number of MAC rules
Maximum number of Layer 3/4 rules
ether type (numuser = 1)
mac dest/mac source
ip protocol
ip dest socket/ip source socket
tcp dest port/ tcp source port
1
vlan/cos/drop/fwd (max 7 vlan rules per profile)
1
1
ip tos
SecureStack C3 Configuration Guide A-1
A
Capacity
15
768
128
128
512
100
No limit
Yes
No
No
Yes
Yes
cos/drop/fwd
cos/drop/fwd
cos/drop/fwd
cos/drop/fwd
cos/drop/fwd