Ipv6 Nd Ra-Interval; Ipv6 Nd Ra-Lifetime - Enterasys SECURESTACK C3 Configuration Manual

ipv6 nd ra-interval

ipv6 nd ra-interval
This command sets the transmission interval between router advertisements.
Syntax
ipv6 nd ra-interval sec
no ipv6 nd ra-interval
Parameters
sec
Defaults
600 seconds.
Mode
Router interface configuration: C3(su)‐>router(Config‐if(Vlan 1))#
Usage
The no form of this command resets the interval value to the default of 600 seconds.
Example
This example sets the router advertisement transmission interval to 120 seconds.
C3(su)->router(Config-if(Vlan 1))# ipv6 nd ra-interval 120

ipv6 nd ra-lifetime

This command sets the value, in seconds, that is placed in the Router Lifetime field of router
advertisements sent from this interface.
Syntax
ipv6 nd ra-lifetime sec | 0
no ipv6 nd ra-lifetime
Parameters
sec
Defaults
1800 seconds.
Mode
Router interface configuration: C3(su)‐>router(Config‐if(Vlan 1))#
22-18 IPv6 Configuration
Specifies the value in seconds of the router advertisement transmission
interval. The value can range from 4 to 1800 seconds.
Specifies the value of the Router Lifetime in seconds. The value must be
0, or an integer between the value of the router advertisement interval
and 9000 seconds.
A value of 0 means that this router is not to be used as the default router.